






| Technical parameter | Practical classification | |
|---|---|---|
| Procedure | Abrasive waterjet cutting with cutting agent | |
| Typical materials | Steel, stainless steel, aluminum, copper, brass, titanium, ceramic | |
| Material examples | 1.4301, 1.4404, 1.4571, S235, S355, EN AW-5083, EN AW-7075 | |
| Material thickness | depending on material and quality requirements; very thick panels also possible | |
| Cutting quality | Selectable from separating cut to precision cut | |
| Heat-affected zone | No thermal edge zone | |
| Structural change | No structural changes caused by heat | |
| kerf | depending on nozzle, abrasive tube and material | |
| Edge pattern | Dependent on material and feed rate, usually little reworking | |
| Typical applications | Mechanical engineering, metal processing, aviation, energy technology | |
| CAD data | DXF, DWG, STEP depending on the machining process | |
| Economic efficiency | strongly dependent on material thickness, contour and number of pieces | |
| Technical parameter | Practical classification | |
|---|---|---|
| Procedure | Cutting with a pure water jet without abrasive | |
| Typical materials | Rubber, foam, plastic, films, textiles, foodstuffs | |
| Material behavior | Suitable for soft, elastic and sensitive materials | |
| Thermal load | none | |
| Abrasive | not required | |
| kerf | Very narrow, depending on nozzle diameter | |
| Cutting speed | usually higher than with abrasive cutting | |
| Edge quality | clean, without thermal deformation | |
| Delamination | Can be minimized with suitable design | |
| Post-processing | often not required | |
| Typical industries | Packaging, food, plastics technology, sealing technology | |
| Economic efficiency | Particularly strong with thin and soft materials | |
| Technical parameter | Practical classification | |
|---|---|---|
| Procedure | CNC-guided 2D contour cutting | |
| Component shape | Flat plates, sheets, panels, technical contours | |
| Suitable materials | Metal, plastic, stone, glass, composite materials | |
| Data basis | mostly DXF, DWG, STEP or technical drawing | |
| Material utilization | Optimizable through nesting | |
| Cutting quality | depending on quality level and feed rate | |
| Tolerance | depending on material, thickness, contour and machine | |
| Heat-affected zone | none | |
| Post-processing | frequently reduced | |
| Quantities | Individual parts, small series, series | |
| Typical applications | Flanges, sheet metal parts, covers, technical blanks | |
| Economic efficiency | Particularly good for complex contours and material mixes | |
| Technical parameter | Practical classification | |
|---|---|---|
| Procedure | Multi-axis CNC waterjet cutting | |
| Axles | 3D or 5-axis machining depending on the system | |
| Geometries | Bevel cuts, chamfers, spatial contours | |
| Cutting angle | depending on machine kinematics and component | |
| Taper compensation | possible, depending on system and programming | |
| Data basis | 3D data, STEP, CAD/CAM programs | |
| Material thickness | depending on material, angle and quality requirements | |
| Cutting quality | heavily dependent on rail planning and feed rate | |
| Heat-affected zone | none | |
| Typical applications | Chamfers, welded edges, complex contour parts | |
| Industries | Mechanical engineering, architecture, aviation, metal construction | |
| Economic efficiency | Strong for complex geometries without toolmaking | |
| Technical parameter | Practical classification | |
|---|---|---|
| Procedure | Micro waterjet cutting | |
| Component size | Small to very small precision parts | |
| kerf | significantly smaller than with standard waterjet cutting | |
| Tolerance | depending on machine, material and contour | |
| Materials | Metals, ceramics, technical materials | |
| Component fixation | particularly critical | |
| Heat-affected zone | none | |
| Contour quality | high with suitable process control | |
| Data basis | Precise CAD data required | |
| Typical applications | Microcomponents, precision mechanics, medical technology | |
| Post-processing | depending on quality requirements low | |
| Economic efficiency | Useful for delicate and heat-sensitive components | |
| Technical parameter | Practical classification | |
|---|---|---|
| Procedure | Parallel waterjet cutting with multiple heads | |
| Use | Series production and recurring contours | |
| Cutting heads | depending on system and component size | |
| Material utilization | Optimizable through nesting | |
| Repeatability | depending on machine concept and fixation | |
| Cutting quality | identically reproducible with stable parameters | |
| Data basis | Series-capable CAD/CAM data | |
| Setup effort | higher than for single-part production | |
| Unit costs | decrease with suitable series sizes | |
| Typical components | Seals, cut-to-size sheets, molded parts | |
| Industries | Automotive, mechanical engineering, packaging, metal processing | |
| Economic efficiency | strongly dependent on quantity and geometry | |
| Technical parameter | Practical classification | |
|---|---|---|
| Materials | CFRP, GFRP, sandwich panels, fiber composites | |
| Procedure | Pure water or abrasive depending on the material structure | |
| Critical factor | Delamination and fiber breakout | |
| Heat-affected zone | none | |
| Cutting edge | depending on fiber orientation and matrix | |
| Material thickness | depending on the structure of the composite material | |
| Fixation | Important to avoid vibration | |
| Post-processing | depending on quality requirements | |
| Data basis | CAD data and material structure helpful | |
| Typical industries | Aviation, automotive, shipbuilding, lightweight construction | |
| Quality assurance | Visual inspection and dimensional check | |
| Economic efficiency | Strong for complex contours without toolmaking | |
| Technical parameter | Practical classification | |
|---|---|---|
| Materials | Glass, natural stone, ceramic, porcelain stoneware | |
| Procedure | mostly abrasive waterjet cutting | |
| Critical factor | Cracking and edge chipping | |
| Heat-affected zone | none | |
| Cutting edge | depending on material structure and feed rate | |
| Grooving strategy | Particularly important for brittle materials | |
| Material support | crucial for breakage prevention | |
| Contours | Free geometries, cut-outs, inner contours | |
| Post-processing | depending on visible edge and application | |
| Typical industries | Architecture, construction, glass industry, ceramics industry | |
| Data basis | CAD data, drawing or template contour | |
| Economic efficiency | Strong for special contours and small series | |
| Technical parameter | Practical classification | |
|---|---|---|
| Materials | Aluminum, copper, brass, bronze | |
| Material examples | EN AW-5083, EN AW-5754, EN AW-6082, EN AW-7075 | |
| Procedure | mostly abrasive waterjet cutting | |
| Thermal distortion | none due to cutting heat | |
| Oxide layer due to heat | none | |
| Cutting edge | depending on alloy and thickness | |
| Material thickness | depending on material and quality level | |
| Contours | External contours, internal cut-outs, technical molded parts | |
| Typical industries | Automotive, electronics, mechanical engineering, energy technology | |
| Post-processing | depending on functional or visible edge | |
| Data basis | DXF, DWG, STEP | |
| Economic efficiency | Strong with complex geometries and a variety of alloys | |
| Technical parameter | Practical classification | |
|---|---|---|
| Production type | Single part, sample part, prototype | |
| Tool costs | No contour-specific tools required | |
| Ability to change | very high via CAD data | |
| Materials | Almost all cuttable materials | |
| Data basis | DXF, DWG, STEP, drawing | |
| Delivery capability | depending on material availability and complexity | |
| Dimensional accuracy | depending on contour, material and quality level | |
| Post-processing | depending on the functional area | |
| Typical industries | Development, toolmaking, mechanical engineering | |
| Quantity | 1 to small series | |
| Economic efficiency | strong with frequent changes | |
| Risk | lower than with tool-based processes | |
| Technical parameter | Practical classification | |
|---|---|---|
| Production type | Small series, medium series, recurring series | |
| Optimization | Nesting, cutting paths, grooving strategy | |
| Material utilization | High influence on unit costs | |
| Repeatability | depending on machine, fixation and data quality | |
| Quality assurance | Dimensional inspection, visual inspection, cutting edge inspection | |
| Setup effort | depending on material and component change | |
| Data basis | CAD/CAM data ready for series production | |
| Post-processing | depending on cutting quality | |
| Typical industries | Automotive, mechanical engineering, packaging, metal processing | |
| Unit costs | decrease with optimized nesting | |
| Delivery capability | depending on material and series scope | |
| Economic efficiency | Strong for complex contours without toolmaking | |
| Technical parameter | Practical classification | |
|---|---|---|
| Type of use | On-site cutting, dismantling, maintenance | |
| Materials | Metal, concrete, composite structures depending on the system | |
| Mobility | depending on system and access | |
| Dismantling effort | can be significantly reduced | |
| Security requirement | high, to be assessed on a project-specific basis | |
| Water handling | depending on location and environment | |
| Cutting geometry | mostly separating or exposing incisions | |
| Accessibility | Critical planning factor | |
| Downtime | can be reduced | |
| Industries | Shipbuilding, construction, energy, industrial plants | |
| Documentation | Operational planning and safety assessment required | |
| Economic efficiency | Strong for systems that are difficult to dismantle | |
| Technical parameter | Practical classification | |
|---|---|---|
| Operating environment | ATEX, offshore, clean room, critical industrial environment | |
| Procedure | Project-dependent pure water or abrasive | |
| Security concept | Mandatory project-specific | |
| Media management | Evaluate water, abrasive and residues | |
| Particle entry | Critical for cleanrooms and electronics | |
| Corrosion protection | Relevant for offshore and humid environments | |
| Documentation | Increased verification requirements | |
| Component access | Central planning factor | |
| Material selection | depending on application and environment | |
| Quality assurance | project-specific | |
| Industries | Offshore, energy, medical technology, electronics, chemicals | |
| Economic efficiency | dependent on risk and downtime costs | |










